Embedded Files
DECOSPAA - Home Interiors | Commercial Interiors | Sports & Play | Landscaping
Product Image
Application Areas
Product Features
Sports Vinyl flooring designed keeping in mind the modern day requirement of a floor that is heavy duty but soft enough for a comfortable and jerk free workout in a gym, sports court or a fitness / wellness Centre. The highly resilient wear layer is produced using specialty resins that takes care of the heavy abrasion loads. The ‘Impregnated Glass Fiber Tissue” reinforcement provides a very high dimensional stability and lay flat properties to the product in any weather conditions. The surface is specially treated with PUR surface treatment for easy maintenance. The densely compacted cushioned base layer absorbs the jerks and also adds to the acoustical property of the floor.
PRODUCT FEATURES:
● Specially formulated high abrasion resistant wear layer which makes it “T ‘ rated.
● Superior shock absorbing cushion base layer.
● These floorings are Glass Fiber Tissue (GFT) reinforced for lay flat, low shrinkage, dimensional stability & strength.
● The product is suitable for heavy traffic areas.
● Application area : sports courts , fitness Centre , Schools, Yoga centers, hospitality , etc.
● Thickness available from 4.50 mm to 8.00 mm.
● Width available: 2.00 mm. x 15mtr
● PUR (Polyurethane) surface treatment enables easy cleaning, scratches resistance & dirt accumulation and also ensures quick cleaning/ mopping.
● Bravo flooring is recommended for indoor use only.
Product Information
PURPOSE:-
● To provide a smooth ,clean ,impervious floor.
● To provide colourful ,attractive and hard surface
● To provide a neat ,clean and pleasing appearance.
● To provide a high abrasion resistant wear layer and Superior shock absorbing cushion base layer.
APPLICATION AREAS:-
● Basketball Courts
● Badminton Courts
● Gymnasiums
● Multi-Purpose Sports
● Yoga Room
● Volleyball Courts
● Tennis court
Technical Information
INSTALLATION METHOD:
STEP 1: MEASUREMENT
▪ Check the room dimensions by getting it measured preferably by a professional installer. Use measuring tape to carefully determine the size of your space to be floored. It is important to get accurate measurement before placing the order for material.
STEP 2: SUBFLOOR PREPARATION
▪ The first and the foremost thing in the preparation of the sub floor is to clear the installation site with a stiff bristled broom to remove all the loose dirt, soil sand, grease, or any other residue from the floor.
▪ Inspect the floor. It needs to be hard flat, levelled and completely smooth. Fill all voids and crack with an appropriate patch levelling compound.
▪ The floor should be tested for any residue moisture. The surface of the floor must be completely dried if moisture content is traced.
STEP 3: ACCLIMATIZATION RELAX SHEET
▪ Sheets must be allowed to relax for 24 hrs in room temperature prior to installation. This will help the sheet to expand or contract and acclimatize to the normal humidity level and prevent vinyl from coming up during its installation process.
STEP 4: FIX COVINGS IN THE CORNER OF THE WALL
▪ Fix the coving strip on the corner of the wall. Coving provides proper shape and acts as a supporting base for sheet vinyl flooring.
STEP 5: PLACE THE SHEET ON THE FLOOR
▪ Place the sheet on the sub floor rolling it across the room as per the marking on the floor according to room dimensions
STEP 6: GLUING & FIXING THE FLOOR.
▪ Flip half of the product over and apply adhesives to the floor and expose some adhesives across the back of the sheet. The adhesives should be allowed to dry as per the manufacture guidelines before fixing the flooring sheet by applying pressure evenly on the flooring. Use the same process to the remaining pvc flooring sheet. If the flooring sheet is patterned then make sure the pattern of adjacent floor roll matches. Use the utility knife to cut the pieces on the edge of the floor length wise as needed.
▪ It is recommended to use a light weight steel roller across the floor to ensure good installation.
STEP 7: THERMAL WELDING FOR SEAMLESS FLOORING
▪ Heat welding is a process for all seams. It is provided for strong watertight and hygienic seams. Heat welding should be done after the flooring adhesive is set up.
STEP 8: CLEANING
▪ Clean the floor with any high-quality, p/h-neutral vinyl cleaner. Install transition pieces -i.e. – thresholds, t-moldings, base shoe. Always secure moldings to the wall, not the floor.
INSTALLATION MATERIALS:
● Tape Measure
● Pencil
● ¼: Wedge Spacers
● Hammer
● Chop Saw or Vinyl Cutter
● Lip-Over Tapping Block
● Pull Tool
● 3M Scotch Blue 2080 Tap
● GENERAL INSTALLATION TOOLS
● Moisture Meter
● Tape Measure
● Pencil
● Chalk Line
● Hand Saw or Power Saw
● Utility Knife
● Crow Bar or Pry Bar
● Wood or Plastic Spacers (¼”)
● Rubber Mallet
Maintenance and Warranty
MAINTENANCE:-
DO'S:-
⮚ Wipe up household spills as soon as possible. Vinyl flooring is resilient, however, spills should still be cleaned up immediately. If the spill is left on the floor for a long period of time, you risk permanently staining the floor.
⮚ Use a doormat to keep out dirt. Grit and dirt that is tracked in from your shoes can act like sandpaper, removing the finish from your floor.
⮚ Protect your flooring from damaging furniture by using floor protectors. A good rule of thumb is that the heavier the item, the wider the floor protector is needed.
⮚ Rinse well to remove all the soap.
⮚ Wash your floor occasionally with a floor cleaner. Look for a neutral cleaner that isn’t too harsh.
⮚ Sweep, dust, or vacuum, your floor daily if needed.
⮚ When moving heavy pieces, you use a plywood sheeting path. If a piece of furniture, or an appliance, is too heavy to carry, you can use a plywood path to drag them. This will protect your flooring and make your move easier.
DONT'S:-
⮚ Never use a detergent that is abrasive. Vinegar or “mop and shine” products may leave a film on your film, rather than give you that shiny floor that you seek.
⮚ Never use a wax polish.
⮚ Never use an abrasive scrubbing tool on your floor. This can cause scratches and harm your flooring..
⮚ Never drench your vinyl with water. Water from an overly wet mop can destroy the glue bond that holds down the vinyl. This can cause the corners to curl and the vinyl floor to become loose.
⮚ Sharp edges can damage the surface of your vinyl floor. Instead, use chairs with felt tips, which won’t harm your vinyl.
WARRANTY: 1 year for colour fade
MEASUREMENT METHOD &UNIT:
● STEP 1: Measure the area of the room. Use the tape to measure the length and then the width of the room , Making a note of measurements.
● STEP 2: Calculate the square footage.
● Step 3: Calculate amount of flooring needed.
● UNIT: SQ.FT
SUBBASE REQUIREMENTS: DRY , LEVELLED, NO DIRT OR GRITS, NO CRACKS, FIRM
Shade Card
Google Sites
Report abuse