Embedded Files
DECOSPAA - Home Interiors | Commercial Interiors | Sports & Play | Landscaping
Product Image
Application Areas
Product Features
Du-co finish or paint is kind of finishing method on the final furniture making process. This technique is to paint raw furniture using spray and also applied to automobile body, plywood and MD F, sheet metal, MS angles and flats, architectural and industrial metal surfaces, etc.
PRODUCT FEATURES:
- Fast Drying
- High Solid content
- Excellent Water Barrier
- Excellent Self Leveling properties
- Takes very well to buffing to give a high sheen
- Smooth and Hard finish
Product Information
PURPOSE:-
- Gives glossy touch
APPLICATION AREAS:-
- Doors
- Window Trim
- Cabinets
- Crown molding
- Window sashes
- Decks
- Handrails
- Cabinet fixtures
- Vehicles
Technical Information
ACCESSORIES:
- Tape.
- Paint Brushes.
- Paint Sprayers.
- Glues
- Paint Buckets.
- Paint Trays & Liners.
- Caulks & Sealants.
INSTALLATION METHOD:
- Scrap off any loose particles, dirt and old paint from the metal surface to bare metal.
- If the base metal is galvanized, an etch primer is recommended.
- For bare sheet metal, a coat of Du-co Oil Primer thinned with a General Purpose thinner in the ratio 5:1 must be applied and allowed to dry overnight. The Du-co Oil Primer has excellent adhesion, corrosion resistance and is air drying.
- Apply 2 coats of Du-co Primer Surface (PS) thinned with Du-co Thinner in the ratio 1:1.5 with a flash off interval of 15 minutes between coats.
- Rectify any minor dents and scratches using Du-co Soft Cut Putty and a putty knife.
- Wet sand with water emery of grit 220 followed by 320 to level any imperfections.
- Apply a coat of Primer Surface on the puttied areas.
- Choose a color
- Apply 2 coats of Du-co NC Lacquer thinned with Du-co Thinner in the ratio 1:2 of the selected color. Allow flash off interval of 15 minutes between coats.
- Leave to dry overnight.
- Wet sand flat (remove gloss) carefully with emery grits 600/800 and apply one mist coat thinned 1:3 with Du-co Thinner.
- Allow to dry overnight and polish the surface using 3 M 1 Step Rubbing compound.
- For a higher gloss polish use 3 m premium liquid wax.
Application for wood and MD F surfaces follows the same procedure as above except for priming using Du-co Oil Primer. The Du-co Primer Surface is applied directly onto the wooden surface.
INSTALLATION MATERIALS:
- Painter's tape
- Drywall compound
- Flat paint or drywall primer
- Paint
Maintenance and Warranty
MAINTENANCE:-
Basic Cleaning
- Scrub the surface with a soft sponge in a circular motion.
- Rinse the sponge, wring it out, and wipe the cabinet again to remove the cleanser.
- If required remove dust and using a cloth soaked
WARRANTY: 1 year for color fade
SUB-BASE REQUIREMENTS: DRY, LEVELED, NO DIRT OR GRITS, NO CRACKS, FIRM
MEASUREMENT METHOD AND UNIT:
- You need to measure the area you are covering for painting
- Measuring the area is fairly easy if you have a square or rectangular shape, as you can easily measure two sides to obtain the square foot.
- AREA=LENGTH X BREADTH ,Consider 5% for wastage
- Unit for measurement- Sq-ft
Shade Card : Available on Request
Videos : Available on Request
Google Sites
Report abuse