Embedded Files
DECOSPAA - Home Interiors | Commercial Interiors | Sports & Play | Landscaping
Product Image
Application Areas
Product Features
These Vinyl Flooring is a heavy duty, fully flexible marbled PVC floor covering of high quality. This product has a unique marbling pattern all over the thickness. Robust adds to the aesthetics of the area where it is installed, as it is produced with one base colour and 2 contrast colours for marbling effect by a special hot granulation process which is unique in nature.
PRODUCT FEATURES:
● Homogeneous,hard wearing and non-directional.
● They are ‘P” rated and have a slip resistance of R9.
● The floorings are embossed with “Raindrop” embossing design which enables quick cleaning & easy maintenance.
● It is available with PUR ( Polyurethane) surface protection providing resistance against scratches & dirt accumulation and also ensures quick cleaning/ mopping.
● The rolls are available in width of upto 2 Mtrs and roll length is normally 15 or 20 meters but can be specified by the customers as well for large orders.
● Thickness available : 1.0 mm to 2.0 mm ( 3.0 mm can be produced against specific order)
Product Information
PURPOSE:-
● To Provide antimicrobial, antifungal floor
● To provide stain resistant floor
● To provide a neat ,clean and pleasing appearance.
● To provide neat ,clean and pleasing appearance
APPLICATION AREAS:-
● Wards and Rooms Flooring
● Corridors Flooring
● Out patient Department Flooring
● Laboratories Flooring
● Reception area
● Rehabilitation area.
● hospital (Pre & post care), blood banks,
● pathology lab, clean rooms, pharmaceuticals
● Robust is most suitable for Offices, Shops, Factories, Porta Cabins, Auditoriums, schools, libraries
Technical Information
INSTALLATION METHOD:
STEP 1: MEASUREMENT
▪ Check the room dimensions by getting it measured preferably by a professional installer. Use measuring tape to carefully determine the size of your space to be floored. It is important to get accurate measurement before placing the order for material.
STEP 2: SUBFLOOR PREPARATION
▪ The first and the foremost thing in the preparation of the sub floor is to clear the installation site with a stiff bristled broom to remove all the loose dirt, soil sand, grease, or any other residue from the floor.
▪ Inspect the floor. It needs to be hard flat, levelled and completely smooth. Fill all voids and crack with an appropriate patch levelling compound.
▪ The floor should be tested for any residue moisture. The surface of the floor must be completely dried if moisture content is traced.
STEP 3: ACCLIMATIZATION RELAX SHEET
▪ Sheets must be allowed to relax for 24 hrs in room temperature prior to installation. This will help the sheet to expand or contract and acclimatize to the normal humidity level and prevent vinyl from coming up during its installation process.
STEP 4: FIX COVINGS IN THE CORNER OF THE WALL
▪ Fix the coving strip on the corner of the wall. Coving provides proper shape and acts as a supporting base for sheet vinyl flooring.
STEP 5: PLACE THE SHEET ON THE FLOOR
▪ Place the sheet on the sub floor rolling it across the room as per the marking on the floor according to room dimensions
STEP 6: GLUING & FIXING THE FLOOR.
▪ Flip half of the product over and apply adhesives to the floor and expose some adhesives across the back of the sheet. The adhesives should be allowed to dry as per the manufacture guidelines before fixing the flooring sheet by applying pressure evenly on the flooring. Use the same process to the remaining pvc flooring sheet. If the flooring sheet is patterned then make sure the pattern of adjacent floor roll matches. Use the utility knife to cut the pieces on the edge of the floor length wise as needed.
▪ It is recommended to use a light weight steel roller across the floor to ensure good installation.
STEP 7: THERMAL WELDING FOR SEAMLESS FLOORING
▪ Heat welding is a process for all seams. It is provided for strong watertight and hygienic seams. Heat welding should be done after the flooring adhesive is set up.
STEP 8: CLEANING
▪ Clean the floor with any high-quality, p/h-neutral vinyl cleaner. Install transition pieces -i.e. – thresholds, t-moldings, base shoe. Always secure moldings to the wall, not the floor.
INSTALLATION MATERIALS:
● Tape Measure
● Pencil
● ¼: Wedge Spacers
● Hammer
● Chop Saw or Vinyl Cutter
● Lip-Over Tapping Block
● Pull Tool
● 3M Scotch Blue 2080 Tap
● GENERAL INSTALLATION TOOLS
● Moisture Meter
● Tape Measure
● Pencil
● Chalk Line
● Hand Saw or Power Saw
● Utility Knife
● Crow Bar or Pry Bar
● Wood or Plastic Spacers (¼”)
Rubber Mallet
TECHNICAL SPECIFICATION
▪ Thickness: 2 mm
▪ Roll width: 1.50 linear m
▪ Roll length: 20 linear m
▪ Tile size : 305 mm x 305 mm
Maintenance and Warranty
MAINTENANCE:-
DO'S:-
⮚ Wipe up household spills as soon as possible. Vinyl flooring is resilient, however, spills should still be cleaned up immediately. If the spill is left on the floor for a long period of time, you risk permanently staining the floor.
⮚ Use a doormat to keep out dirt. Grit and dirt that is tracked in from your shoes can act like sandpaper, removing the finish from your floor.
⮚ Protect your flooring from damaging furniture by using floor protectors. A good rule of thumb is that the heavier the item, the wider the floor protector is needed.
⮚ Rinse well to remove all the soap.
⮚ Wash your floor occasionally with a floor cleaner. Look for a neutral cleaner that isn’t too harsh.
⮚ Sweep, dust, or vacuum, your floor daily if needed.
⮚ When moving heavy pieces, you use a plywood sheeting path. If a piece of furniture, or an appliance, is too heavy to carry, you can use a plywood path to drag them. This will protect your flooring and make your move easier.
DONT'S:-
⮚ Never use a detergent that is abrasive. Vinegar or “mop and shine” products may leave a film on your film, rather than give you that shiny floor that you seek.
⮚ Never use a wax polish.
⮚ Never use an abrasive scrubbing tool on your floor. This can cause scratches and harm your flooring..
⮚ Never drench your vinyl with water. Water from an overly wet mop can destroy the glue bond that holds down the vinyl. This can cause the corners to curl and the vinyl floor to become loose.
⮚ Sharp edges can damage the surface of your vinyl floor. Instead, use chairs with felt tips, which won’t harm your vinyl.
WARRANTY: 1 year for colour fade
Shade Card
Maintenance Video
Installation Video
Google Sites
Report abuse