Double Charged Vitrified Tiles Flooring

Double Charge Vitrified tiles have a very long life and are scratch proof with more durability. They are made up and manufactured by infusing two layers of tiles. It has a different phase and body where the top layer design is the mixture of raw material infused with color pigment pressed to the base layer under high pressure. The top layer body is 3 to 4 mm thick. Double charged tiles are a type of vitrified tiles that acquire in different colors and sizes widely used in home, corporate office and for any living space. Double charge vitrified tiles are fed through a press that prints the pattern with a double layer of pigment, 3 to 4 mm thicker than other types of tile. This process does not permit complex patterns but results in a long-wearing tile surface, suitable for heavy traffic commercial projects. The design layer should not be more than 4mm thickness, which may weaken the strength of the tile. The best part about these tiles is that they are highly durable, maintenance-free and suitable for high-traffic areas.

PRODUCT FEATURES:

● Versatility and durability is good.

● Waterproof

● Fire resistance ,High strength and Anti-skid

● Eco-friendly ,Scratch and stain resistant

● Chemical Resistant

● Easy to clean and maintenance

● Unique design and ultimate strength.

● Cheapest vitrified tiles available in the market.

● These tiles prevent dirt and grime and are stain free with a homogenous surface.

● Double charged Tiles creates the value, style and durability that collide with the look and designs you desire with the touch of luxury within!

INSTALLATION METHOD:

1. The ground should be compacted properly by ramming and applying
2. Water on it as per the standard practice to create a firm base. Ensure that there is no settlement of base. Also ensure the natural slope for drainage.
3. Please lay the tiles on the substrate to match the colour properly before actual fixing.
4. For low pedestrian traffic, on this base apply 4” to 6” thick BBC (Brick Bats Cement Concrete).
5. For medium traffic floors, on the BBCC base, make 3” thick PCC (Plain Cement Concrete) in 1:3:6..
6. Prepare base mortar by mixing sand and cement in 1:4 proportions.
7. Lay the mortar on the substrate prepared as mentioned above in required line and level. It should be noted that in any case the bed mortar thickness should be more than 1” thickness.
8. Mark the centerline and fix the tiles on all the corners and center in the required level. Preferably, start fixing tiles parallel to longer span.
9. Prepare thick cement paste by mixing water & cement. Apply this paste on the backside of the tile to fix it.
10. Fixing of tile has to be done with a minimum gap of 8mm. We do not recommend tiles to be laid without a gap (to provide for expansion due to sunlight/heat).
11. Lay the tiles on this firm base and ram lightly with the help of a rubber hammer or trowel from top. See that the tile top surface is laid in the required line and level with proper joint gap.
12. Utmost care should be taken while fixing other tiles in terms of matching lines and keeping exact joint width between tiles. (For maintaining joint width spacers are recommended of required joint thickness).

INSTALLATION MATERIALS:

❖ tile spacers

❖ sponge

❖ bucket

❖ notched trowel

❖ tile cutter

❖ broom

❖ chalk line

❖ thin-set mortar

❖ grout

❖ tiles

❖ Tape

❖ Pencil

❖ tiles