Plain Epoxy Flooring

Plain Epoxy flooring is a unique floor material that has steadily grown in popularity. Once a concrete floor has been smoothed and prepped, a resin and a hardening chemical are mixed together. The chemical reaction will turn the mixture into a hard plastic floor over a few days. So the compound is poured onto the concrete and allowed to harden before a second or third layer is applied. This liquid to solid process gives epoxy flooring the ability to be strong, stain resistant, and more. Plain Epoxy Resin is a high-performance product designed for residential, industrial and commercial applications. With the outstanding chemical resistance, durability, low porosity and strong bond strength as a roll coat is idea for simple garage application. Epoxy floor coating makes renders concrete exceptionally durable. They also offer benefits of anti-fatigue and can be easily rolled-out on the cement without mortar or glue

PRODUCT FEATURES:

⮚ Creates a shiny high-gloss surface that can significantly increase the brightness of interior areas

⮚ Offers a hard-wearing durable surface able to withstand heavy and continuous traffic

⮚ Quick and easy to install, requiring no layout, cutting additional adhesives, or special tools or equipment

⮚ Durable and easy to clean

⮚ Resists oil stains and water

⮚ Creates a seamless surface that can last many years

⮚ Can be combined with paints and colors to mask off chips and cracks

⮚ Provides a chemically resistant surface ideal for manufacturing plants

⮚ Offers enhanced safety when the surface contains anti-slip additives

⮚ Can be applied in different patterns to create visible driveways and/or identify walkable areas

⮚ Prevents wear and tear on existing concrete floors

⮚ May be compatible with self-leveling products that can be applied over new or old concrete, depending on the product

⮚ Requires little or no major maintenance

⮚ High Gloss

⮚ Easy to use and Excellent Adhesion

⮚ Tenacious bond to most substrates

⮚ High durability and Waterproof

⮚ Easy and fast to apply

⮚ One Epoxy for all systems

⮚ Self-Leveling and Low Viscosity

⮚ Good abrasion resistance

INSTALLATION METHOD:

1. Step 1: Clean Concrete Surfaces

● If necessary, use a flat-edged shovel or scraper to remove hardened debris. Then, vacuum the garage floor. Prepare a cleaning/degreasing solution according to manufacturer's instructions. Wearing rubber gloves, use a stiff-bristle brush and the solution to scrub off any grease or oil stains.

1. Step 2: Wet Flooring

● Use a hose to wet the entire floor with water. Working in 5-foot-square sections, use a power scrubber with a brush attachment and the degreaser to clean the entire floor. Use the stiff-bristle brush to scrub the corners and along the walls where the machine can't reach. After the floor is clean, use a rubber squeegee to pull soapy water into a central area. Remove the solution with a wet-dry vac. Check with your county's environmental office to see if you are allowed to dispose of the solution by flushing it down the toilet.

1. Step 3: Prepare Acid-Etching Mixture

● Pour a gallon of water into a plastic sprinkler can. Wearing a vapor respirator, pour 12 ounces of 32-percent muriatic acid into 15 cups of water (for smaller or larger amounts, use 1 part acid to 10 parts water) in the sprinkler can. Mix the solution for a few seconds with a paint stirrer. Sprinkle the mixture evenly over a 10x10-foot area.

1. Step 4: Scrub and Etch

● Power-scrub the 10x10-foot area for 10 minutes or use a long-handled acid brush (to save on equipment rental). Repeat the sprinkling/scrubbing process until the entire floor is acid etched. Rinse three times to flush acid residue. Let the floor dry overnight.

1. Step 5: Mix Epoxy Coating

● Following manufacturer's instructions, use a drill and stirring bit to mix together the two epoxy solutions. To ensure complete blending, pour the mixture into a second bucket and power-mix the paint again.

1. Step 6: Apply Along Perimeter

● Using duct tape, tape the area directly beneath the garage door, then brush a 4-inch strip of epoxy against the tape and along the garage walls.

1. Step 7: Roll on Epoxy

● Use a 9-inch-wide roller with a medium nap to paint the floor. Attach the roller to a pole. Then, dip the roller into the bucket of epoxy so only the bottom half of the roller is covered. (This loads the roller with the right amount of epoxy.) Working in a 4-foot-square area, apply epoxy to garage floor in a large "W" pattern. Backroll to fill in the pattern and remove any roller marks. Make sure edges remain wet as you move from section to section to prevent noticeable seams from forming. Let the first coat dry per manufacturer's instructions.

1. Step 8: Apply a Second Coat

● If you don't want a glossy floor (they are slippery when wet), add a non-skid floor coating into the epoxy for the second coat. Stir with the drill and stirring bit. Repeat Step 7. Want to add color flakes? Scatter them lightly while the area is still wet—add more flakes until you create your desired pattern.

1. STEP 9: FINISHING

● Mask off and paint the bottom 4 inches of garage or basement wall with the epoxy mix used on the floor. This border creates a cohesive look that also acts as a protective baseboard. Vacuum or sweep up debris, immediately wipe away spills with a soft cloth, and deep-clean soiled floors by mopping with a mixture of ½ cup ammonia to a gallon of water.

1. STEP 10 : CURING & PROTECTION

● Allow flooring system to cure undisturbed for at least 24 hours after application of final coat. Semi-rigid epoxy coatings require 7 days at room temperature to reach nominal design strength, and flexible epoxies may require longer periods to reach nominal full cure. Lower temperature extends curing times, and a useful rule of thumb is that cure time requirements double for every 15-20 degrees F drop below room temp.

INSTALLATION MATERIALS:

❖ Two-part epoxy paint

❖ Flat-edge shovel or scraper

❖ Shop vacuum

❖ Garden hose

❖ Power scrubber with brush attachment or long-handled acid brush

❖ Stiff-bristle brush

❖ Rubber squeegee

❖ Plastic sprinkler can

❖ Drill with stirring bit

❖ Paintbrushes

❖ 9-inch medium-nap roller and roller pole

❖ Duct tape

❖ Plastic bag

❖ Cleaning/degreasing solution

❖ Rubber gloves

❖ Respirator

❖ 32-percent muriatic acid