Embedded Files
DECOSPAA - Home Interiors | Commercial Interiors | Sports & Play | Landscaping
Product Image
Application Areas
Product Features
Solid surface is a man-made material usually composed of a combination of alumina Tri-hydrate , acrylic, epoxy or polyester resins and pigments. It is most frequently used for seamless counter-top installations.
PRODUCT FEATURES:
- Stain Resistant
- Antimicrobial
- Sealing and Painting NOT Required
- Durable
- Tough
- Easy to clean
- Repairable
- Seamless
Product Information
PURPOSE:-
- It gives the hard surface and base to the area
- It enhances the beauty of the surface
APPLICATION AREAS:-
- Kitchen/Bathroom: kitchen worktops with integrated sink, vanity counter-top, bath tub etc.
- Hospitality/Catering: bars, tables, reception desks etc.
- Shop Fitting: displays, counters, wall cladding etc.
- Airports: check-in counters
- Public buildings: displays in museums, facades, meeting tables etc.
- Hospitals: laboratory counter-tops, decontamination sinks, endoscopy etc.
Technical Information
ACCESSORIES:
- Razor Knife
- Hammer
- Screw Gun
- Tape Measure
- Pencil
- Masonry Saw
- Level/String Line
- Rubber Mallet
- Trowel
- Grout Bag
- Joint Slicking Tool
- Brush
INSTALLATION METHOD:
- Cabinets or other supports for counter-top must be level to within ⅛” over a 10 foot length.
- The portion of the top that is above the cabinets needs support using strips of wood or plywood that are 2-1/2” to 3” wide and ¾” to 1” thick.
- These strips are placed front to back every 18” or less and can be affixed to the top of the cabinets with screws, glue or daubs of silicone
- Do not use full sheets of plywood for support instead of wooden strips. The solid surface top needs to dissipate heat from the underside to prevent damage to the top or cabinets from expansion or contraction.
- Hold the counter-top in place using thumb sized dabs of silicone sealant placed on the strips about every 12”. Alternatively, the strips can be affixed under the surface of the top with the dabs of silicone sealant.
- Then, the top (with the strips attached) can be affixed to the cabinet tops with dabs of silicone sealant. Silicone sealant is used to allow for expansion and contraction of the top. These 1” thick strips serve a secondary purpose.
- If you place the counter-top on top of the cabinets without these 1” spacers, the 1” dropped edge on the front of the counter-top could prevent the drawers near the top of the cabinets from opening.
Maintenance and Warranty
MAINTENANCE:-
- Use a damp microfiber cloth to wipe down the surfaces.
- For dirty or stained areas, use mild dish soap and water.
- Also acceptable are ammonia-based cleaners such as most glass or general purpose cleaners.
- Towels dry the surface to prevent water spots.
WARRANTY: 1 year for color fade
SUB-BASE REQUIREMENTS: DRY, LEVELED, NO DIRT OR GRITS, NO CRACKS, FIRM
MEASUREMENT METHOD AND UNIT:
- You need to measure the area you are covering.
- Measuring the area is fairly easy if you have a square or rectangular wall, as you can easily measure two sides to obtain the square foot.
- AREA=LENGTH X BREADTH ,Consider 5% for wastage
Shade Card : Available on Request
Videos : Available on Request
Google Sites
Report abuse