Open Cell Ceilings

Open Cell suspended ceiling design adds depth and infinity to the place it is applied. Unlike standard suspended ceilings, it provides a modern and modern design. It is suitable to strengthen your design by using different types of lighting fixtures. It can easily interfere with the installation behind the ceiling through the cell openings, allowing the smoke to pass quickly behind the ceiling in the event of a fire.

PRODUCT FEATURES:

• unique seamless look to any indoor space
• Each unit made up of aluminum alloy strip blends
• Easily installed and removable cell elements provides easy access
• Multiple cell element height options available
• A wide range of colors to achieve a customized effect
• Individually replaceable cell elements

TECHNICAL SPECIFICATION:

• Standard Module Cell Size
• 75 mm x 75 mm, 100 mm x 100 mm, 150 mm x 150 mm, 200 mm x 200 mm, 300 mm x 300 mm
• Web Height: 50 mm
• Width: 10 mm
• Thickness: 0.45 mm
• Finish: power-coated(epoxy polyester paint) and limitless colors
• Dimension: other customized dimensions also available as per factory confirmation.
• Substrate: Aluminum alloy
• Tee Grid: >> Main runner- 3600 mm x 15 mm x 32 mm x 0.30 mm
• >> Cross tee- 1200 mm x 15 mm x 26 mm x 0.30 mm
• >> Cross tee- 1200 mm x 15 mm x 26 mm x 0.30 mm
• >> Wall Angle- 3000 mm x 15 mm x 15 mm x 0.40 mm

ACCESSORIES:

• L Anger
• Hanger Of Spring Tee
• Expansion Screw
• Spring Tee
• Hanger Of 38 Main Channel
• Main Channel
• Thread Rod

INSTALLATION METHOD:

1. Create a ceiling layout plan or use the one from the architect.
2. Determine the required suspension points
3. Define which generally approved dowel is suitable.
4. Mount the dowels as specified by the dowel manufacturer and carry out extraction tests using the device recommended by the dowel manufacturer, if necessary.
5. Follow the same procedure when mounting the perimeter trim, mounting interval approx. 400-625 mm, check transmission of force into wall.
6. Shorten the provided fastening elements, such as the M 6/M 8 threaded rod to the intended length or order the correct length and mount it on the raw ceiling.
7. As a rule, arrangement of the panels should be from the center of the room to compensate or halve the tolerances of the room/panels.
8. As a rule, durum metal ceilings are provided with cross grids [primary profile].
9. Use the layout plan to determine in which direction the cross-bracing profiles are laid, either in parallel to the facade [usually] or vertically to the facade.
10. After completion and pre-acceptance of the ceiling, the sequence of joints should be re-aligned. Soiled ceiling panels should be cleaned to give a perfect result for assembly