Embedded Files
DECOSPAA - Home Interiors | Commercial Interiors | Sports & Play | Landscaping
Product Image
Application Areas
Product Features
A Gypsum board false ceiling is made using gypsum plasterboard’s, fixed with screw to metal frame connected . Gypsum plasterboard’s come in larger sheets that POP sheets and therefore there are fewer joints. The joints are finished using jointing compound. Installing gypsum plasterboard is a faster process that is clean, much more efficient and healthier due to the less residue and dust arising as part of the process. Gypsum false ceiling offers great flexibility in design. Gypsum versatility makes ii the most preferable product for false ceiling.
PRODUCT FEATURES:
- Fire resistance
- Durability
- Economy
- Versatility
Product Information
PURPOSE:-
- It provides a smooth homogeneous surface to the roof.
- It provides fire protection
- False ceiling helps in acoustical treatment.
- It conceals all the non-pleasing elements and hides it from the viewer’s eyes.
- It also hides the pipelines and the electrical cables running in the room. All the ducts of air-conditioning can be hidden under it.
APPLICATION AREAS:-
- Office area, shopping mall, multiplex
- Airport, terminals, hotels
- Waiting areas, exhibition centers
- Educational hubs, residential
Technical Information
Density: nominal in a dry state = 807.10 kg/m
Fire resistance: 12.5 mm = ½ hour resistance
Sound insulation: The average rate of noise reduction between frequencies of 100 Hz is 35.6 dB for a partition 75 mm or 97 mm thickness with a 12.5 mm board on each face 38.5.
ACCESSORIES
- Ceiling section
- Connecting clip
- Gypsum cornice
- GI ceiling angle
- Dry wall joint tape
- Gypsum ceiling panel
- Screw
INSTALLATION METHOD:
- Measurements- To begin; use your tape measure to measure the ceiling by using a wall that is perpendicular to the joists.
- Custom Gypsum Boards-Take your razor knife and shorten a piece of gypsum board to this exact length.
- Screwing Them Up-Take your screw gun and fix drywall screws into the edges of the board every six inches, making sure that you only do this when underneath a joist or it will not hold properly.
- Next, smother the seams between the gypsum boards with your drywall tape. Then spread with joining compound using your drywall knife. Feel free to use joining compound to cover sunken screw holes.
- The drying time for this procedure is around four hours. Use your drywall sandpaper to smooth over the entire dried joining compound.
- A second layer of compound must then be added, following the same technique before applying an extremely thin third layer. After this has been dried and sanded, you can begin painting your new gypsum board ceiling.
INSTALLATION MATERIALS:
- Ceiling angles
- Joint Finish
- Channels
- Ceiling Sections
- Plaster board
Maintenance and Warranty
MAINTENANCE:-
- Regular cleaning of the ceiling with a sponge would just do.
WARRANTY: 1 year for color fade
SUB-BASE REQUIREMENTS: DRY, LEVELED, NO DIRT OR GRITS, NO CRACKS, FIRM
MEASUREMENT METHOD AND UNIT:
- Calculate the total area of the ceiling.
- Minus the area not covered by the false ceiling.
- Plus the edges made to close the false ceiling
- UNIT: SQ.FT
Shade Card : Available on Request
Videos : Available on Request
Google Sites
Report abuse