Zebra Blinds

Zebra blinds are neat, modern and an increasingly popular choice. They offer a fashionable modern look for your windows or conservatory and are tailor-made to fit the most intricate and complicated windows. they’re unique in both style and function. Soft, sheer layers and elegant textured fabric give these transitional window treatments clean, bold lines. Like the different stripe patterns on zebras, they come in a number of different colors to fit any décor. They’re the perfect complement to contemporary and minimalist interiors. A modern marriage between reliable roller shades and traditional horizontal blinds, zebra shades combine superior light control with a layer of privacy. They’re made from two layers of alternating bands of sheer and semi-opaque or solid fabric attached to a roller. Opening them rotates the fabric so the bands, or slats, sit directly on top of each other. As the layers pass each other, they create the appearance of the dark and light stripes on a zebra. When opened, light shines through the transparent sections and allows a view to the outside. When closed, the non-transparent bands overlap to provide privacy and help protect your furniture and valuables from harmful UV rays.

PRODUCT FEATURES:-

· Modern contemporary and fashionable in a wide range of colors

· Easy to operate

· Neat, tidy and stylish blind product - Modern and Contemporary

· Practical and stylish with control options- including motorized.

· Good appearance and elegant.

ACCESSORIES:-

▪ Cord lock cover

▪ Cord lock

▪ Top rail

▪ Cord guide

▪ Cellular fabric

▪ Hold down bracket

▪ Chain connector

▪ Filler strip

▪ LCS pocket and ferrule

▪ End cap

▪ Tassel

▪ Pull cord

▪ Safety Condenser

▪ Lift string

INSTALLATION METHOD:-

1. From the point at the bottom of your window where your blinds will hang, measure up to the top of your window the length of the blinds you have ordered. Make a mark at the top of the measurement and center your head rail on the mark.
2. Use a pencil to make a mark 3 inches in from each end of the head rail.
3. Align the top of your left bracket along the inside of the pencil line and fasten to the wall with the supplied screws. Repeat on the right side, as well as for any additional brackets. Make sure the brackets are aligned and level.
4. Hook the front of your head rail into the brackets and push up on the backside until it snaps into place.
5. To install the vanes or louvers, pull the cord to space the vane stems evenly, then use the chain to rotate until the openings are facing you.
6. Attach the first vane by gently sliding it up into the plastic stem until it snaps into place. Repeat this process until all vanes are attached.
7. Install your safety bracket to keep the cord or chain taut. Place the bracket near the outside bottom of the window frame where it will not interfere with the operation of your vertical blinds.
8. Insert the valance ends into the corners of the valance and attach to the front. Attach the included valance clips onto the head rail and slide the valance onto the clips.
9. Test your new blinds. Use the pull cord to slowly raise and lower your blinds, and tilt your slats by either adjusting the tilt cord or rotating the wand.