Solidwood Tiles Flooring

Product Image

Application Areas

Product Features

Solid Wood deck tiles can easily transform a dull patio or deck into a vibrant, modern and attractive place to entertain or relax. With the many options available in interlocking composite, faux and real wood tiles you can create the space of your dreams for a lot less than you might think.

PRODUCT FEATURES:

· Easy to apply

· Durable

· Indoor and outdoor

· Selected materials

· Safe to use

· Wide applicability

Product Information

PURPOSE:-

● To decorate the floor and give a cozy feel and wooden look.

● To provide a smooth, clean, impervious floor.

● To provide colorful ,attractive and hard surface

APPLICATION AREAS:-

● Shop Flooring, Warehouse

● Port Cabins and Garages

● Factories and automobile industry.

● In home area such as bathroom ,balcony and lobbies

● High traffic areas such as bus and train station , Airport areas

● Wet areas and Parking

● Pavements and swimming pool deck

Technical Information

ACCESSORIES:

· Solid Joist

· PE Clip

· SS Start Clip

INSTALLATION METHOD:

A piece of solid wood flooring is very strong but not dimensionally stable, so the tiles must be fixed into position during installation.

1. Find or prepare a flat, solid surface.

2. Snap the tiles together.

3. Start on the outside.

4. Make measurements for cutting.

5. Cut the tiles.

6. Install the trim.

7. Install the fascia.

INSTALLATION MATERIALS:

· Grout Float - for between tiles

· Nippers - for fitting edges of tile

· Straight Edges - for gauging flat floor

· Spacers - for joint spacing

· Tile Cutter - for cutting tile

· Drill and Mixing Paddle

· Chalk Line

· Hammer and Nails or Screws

· Tape Measure

Maintenance and Warranty

MAINTENANCE:-

DO'S:-

· If your deck has accumulated dirt or debris on its surface, the best way to get rid of it is to spray it off using a hose, or to brush it off using a soft bristle broom.

· If you spill food, oil, or grease on your composite deck, you should remove the spills as quickly as possible and clean the area with warm soapy water.

· Always use dirt-free, clean water during cleaning. Ensure you frequently make a new cleaning solution to avoid reintroducing dirt to the tiled surface.

DONT'S:-

· It’s important to avoid letting the soapy water or cleaning agent sit and dry on the surface of the deck.

· While you can use a pressure washer to wash the surface of the deck, you should avoid using one higher than 1,500 psi, and never place the nozzle closer than 12” above the deck.

· Avoid using steel wool, scouring powders, or other abrasives

· Don’t use bleach or ammonia-based cleaners

· Don’t let spills sit, try to clean up spills as quickly as possible

· Don’t use bleach or any acidic solutions to clean your tiles: they may cause more harm than good.

WARRANTY: 1 year for color fade

SUBBASE REQUIREMENTS: DRY, LEVELLED, NO DIRT OR GRITS, NO CRACKS, FIRM

MEASUREMENT METHOD AND UNIT:

  • Step 1: Measure the Area of the Floor. Use the tape measure to measure the length and then the width of the room, making a note of the measurements.
  • Step 2: Calculate the Square Footage.
  • Step 3: Calculate the Amount of Flooring Needed.
  • UNIT: - SQFT

Shade Card : Available on Request

Videos : Available on Request