Soluble Salt Vitrified Tiles

Product Image

Application Areas

Product Features

Soluble salt vitrified tiles are screen printed and polished. Soluble salt tiles are made up with simpler technology that uses liquid color screen printing to design on the surface of the tile. Soluble salt tiles are pressed under high pressure where the soluble salt liquid is infused to give the perfect color and pattern to the tile.

PRODUCT FEATURES:

● Versatility and durability is good.

● Waterproof

● Fire resistance.

● High strength and Anti-skid

● Eco-friendly

● Scratch and stain resistant

● Chemical Resistant

● Easy to clean and maintenance

● Unique design and ultimate strength.

● Cheapest vitrified tiles available in the market.

● Soluble salts are used to penetrate the surface of tile and give its colour design and pattern.

Product Information

PURPOSE:-

● To Provide Water tight floors.

● To provide a smooth ,clean ,impervious floor.

● To provide colourful ,attractive and hard surface

● To provide a neat ,clean and pleasing appearance.

● Enhance the beauty of the floor.

APPLICATION AREAS:-

● Soluble salt tile is a modern contemporary and fashionable floor with a wide range of colour.

● Soluble Salt Tiles are most suitable and applicable for Commercial

● Soluble salt tiles are suitable in bedroom, drawing room, living room, kitchen space and other interior spaces.

● These tiles are water resistant hence this makes an ideal flooring solution for spaces such as basements, kitchen ,bathroom ,restaurants and cafes.

● It is also perfect in your home as well as commercial offices and applications.

● Showroom and basements.

● Home interior living room and bedroom

● Balcony and study room, hotels

● Low traffic areas.

● Parking areas ,terrace area and elevation sector

Technical Information

INSTALLATION METHOD:

  1. The ground should be compacted properly by ramming and applying
  2. water on it as per the standard practice to create a firm base. Ensure that there is no settlement of base. Also ensure the natural slope for drainage.
  3. Please lay the tiles on the substrate to match the colour properly before actual fixing.
  4. For low pedestrian traffic, on this base apply 4” to 6” thick BBC (Brick Bats Cement Concrete).
  5. For medium traffic floors, on the BBCC base, make 3” thick PCC (Plain Cement Concrete) in 1:3:6..
  6. Prepare base mortar by mixing sand and cement in 1:4 proportions.
  7. Lay the mortar on the substrate prepared as mentioned above in required line and level. It should be noted that in any case the bed mortar thickness should be more than 1” thickness.
  8. Mark the centerline and fix the tiles on all the corners and center in the required level. Preferably, start fixing tiles parallel to longer span.
  9. Prepare thick cement paste by mixing water & cement. Apply this paste on the backside of the tile to fix it.
  10. Fixing of tile has to be done with a minimum gap of 8mm. We do not recommend tiles to be laid without a gap (to provide for expansion due to sunlight/heat).
  11. Lay the tiles on this firm base and ram lightly with the help of a rubber hammer or trowel from top. See that the tile top surface is laid in the required line and level with proper joint gap.
  12. Utmost care should be taken while fixing other tiles in terms of matching lines and keeping exact joint width between tiles. (For maintaining joint width spacers are recommended of required joint thickness).

INSTALLATION MATERIALS:

❖ tile spacers

❖ sponge

❖ bucket

❖ notched trowel

❖ tile cutter

❖ broom

❖ chalk line

❖ thin-set mortar

❖ grout

❖ tiles

❖ Tape

❖ Pencil

❖ tiles

Maintenance and Warranty

MAINTENANCE:-

DO'S:-

⮚ Sweep, dust, or vacuum, your floor daily if needed.

⮚ After installation, apply tile and grout sealer in order to maintain your tiled surfaces.

⮚ Rugs or mats may be used (especially in entryways and exits) to avoid unnecessary dirt and grit entering the house, this may also help avoid slipping or scratching.

⮚ Always perform routine cleaning maintenance to your tiled surfaces. Conduct a routine maintenance check of your tile for dirt, stains, or cracks.

⮚ Always use dirt-free, clean water during cleaning. Ensure you frequently make a new cleaning solution to avoid reintroducing dirt to the tiled surface.

DONT'S:-

⮚ Avoid using steel wool, scouring powders, or other abrasives

⮚ Don’t use bleach or ammonia-based cleaners

⮚ Do not clean glazed tile with oil-based cleaners

⮚ Don’t let spills sit, try to clean up spills as quickly as possible

⮚ Don’t use bleach or any acidic solutions to clean your tiles: they may cause more harm than good.

⮚ Don’t use harsh scouring pads or steel wool. They may scratch and damage the surface of the tile.

⮚ Don’t neglect to understand the limitations of your tile. Each tile is manufactured for a specific purpose, check the suitability of the tiles are fit for the use of your intentions.

⮚ Don’t assume tiles are indestructible. Though durable, they may crack and chip if they are subject to unnecessary force, weight or neglect.

WARRANTY: 1year for colour fade

SUBBASE REQUIREMENTS: DRY , LEVELLED, NO DIRT OR GRITS, NO CRACKS, FIRM

MEASUREMENT METHOD AND UNIT:

● STEP 1: Measure the area of the room. Use the tape measure to measure the length and then the width of the room , Making a note of measurements.

● STEP 2: Calculate the square footage.

● Step 3: Calculate amount of flooring needed.

● UNIT: SQ.FT

Shade Card : Available on Request

Maintenance Videos

Installation Video