HPL Panels

Product Image

Application Areas

Product Features

PRODUCT BRIEF- HPL means High pressure laminate panel. High Pressure Laminate (HPL) panels are a form of cladding typically manufactured by layering sheets of wood or paper fiber with a resin and bonding them under heat and pressure. They sometimes include additional chemicals to provide fire retardant properties and are available in a wide range of colours and finishes. It is widely used for exterior as well as interior surfacing purposes in commercial properties. HPL cladding are manufactured by pressing and heating multiple layers of Kraft paper impregnated with thermosetting resins that have exceptional bonding strength

PRODUCT FEATURES:

  • Aesthetic effects
  • Hassle free maintenances
  • Safe to use
  • High Weather Resistant
  • Optimal Light Fastness
  • Scratch Resistant
  • Solvent Resistant
  • Self-Supporting exterior facade
  • Impact Resistance
  • Easy to maintain
  • Heat Resistant
  • Fire Resistant
  • Free from heavy metals
  • Sustainability
  • Easy, rapid installation & repair procedure for exterior wall claddings
  • Increased sound proofing function(upto 15 Db)
  • Decrease air conditioning costs from insulation façade cladding
  • Low cost maintenance
  • Provide wall protection & heat insulation to buildings against atmospheric precipitation
  • Phenolic core: The quality of Kraft sheets that are impregnated with phenolic resin.
  • Decorative paper sheets with surface protection for external use

Product Information

PURPOSE:-

  • Enhance the beauty of Exteriors
  • To withstand high winds, snow ,hail ,torrential rain and fire.
  • To provide insulation to building
  • To serve as a solid barrier allowing the users to enjoy sound detections from the outside environment.

APPLICATION AREAS:-

  • Elevation and Façade Cladding
  • Balcony Casing
  • Fencing
  • Partitions using hpl
  • Railings
  • Louvers
  • Duct Covering on elevations
  • Signage with HPL framing
  • Pedestrian Shelters
  • Roofing
  • Soffits
  • Prefab Huts using HPL
  • For Gate And Shop Fronts

Technical Information

ACCESSORIES:

INSTALLATION METHOD:

  • Align the compact laminate & fix the same on channel with the help of VHB channel & PU sealant. Apply pressure with a rubber roller or by hand. Kindly ensure proper alignment of panel before pressurized for bonding. Enough pressure should be applied so that both surfaces fully contact the tape.
  • Fix other compact laminates in the same fashion & maintain a 3mm to 4mm gap between two compact laminates. Kindly note to achieve maximum bonding strength, minimum 24 hours is required for optimum curing after installation process.

INSTALLATION MATERIALS-

  • HPL Panel
  • Rivet
  • Angel Aluminum and support
  • Padding
  • Silicon sealant
  • Spacer
  • Screw
  • Steel strip

Maintenance and Warranty

MAINTENANCE AND WARRANTY

MAINTENANCE:-

  • Try to clean the accumulated dirt with clear water.
  • If the dirt remains, use a soft cloth with diluted solution of mild soap and clean water to wipe the dirt away. Use clear water again to reveal a clean surface.
  • If the mild soap and clear water solution fail to clean the surface, then use isopropyl solution to clean the sheets.
  • Don’t use acid base ,bleach based detergent to clean HPL sheets.
  • Avoid cleaning HPL sheets by using Scouring agent and abrasive.
  • To finish off clean water along with little pressure can be applied on the HPL panels

WARRANTY: 1 year for colour fade

SUBBASE REQUIREMENTS: DRY , LEVELLED, NO DIRT OR GRITS, NO CRACKS, FIRM


Shade Card : Available on Request

Videos : Available on Request