Exterior Louvers
Product Image
Application Areas
Product Features
PRODUCT BRIEF- A Exterior Louvers is a solid and stable window covering usually consisting of a frame of vertical stiles and horizontal rails (top, centre and bottom). Louvers may be employed for a variety of reasons, including controlling the amount of sunlight that enters a room, to provide privacy, security, to protect against weather or unwanted intrusion or damage and to enhance the aesthetics of a building.
PRODUCT FEATURES:
- Aesthetic effects
- Longevity and flatness
- Highly durable
- Beauty and versatility
- Fire resistance and waterproof
- Environmental friendly
- Chemical resistance
- Easy to install and maintain
- UV resistance
- Easily bent folded and turned
- Borer ,termite and fungi resistance.
- Lightweight
- Antimicrobial properties
- Easy to clean and perforate
Product Information
PURPOSE:-
- Enhance the beauty of Exteriors
- To withstand high winds, snow ,hail ,torrential rain and fire.
- To provide privacy and security
APPLICATION AREAS:-
- Facades
- Wall covering ,
- School building
- Multiplex and commercial building
- Shopping malls
- ,hotel and hospitals
- Offices
- Residential home
Technical Information
ACCESSORIES:
INSTALLATION METHOD:
- Locate all anchor clip angles (Minimum of 1-1/2” x 2” x 1/8” thick x 2” long (38x51x3x51)) as required to establish proper louver depth and position.
- Install the lower left section (as viewed from the exterior)following steps 2-4 in “Single Section Louver Installation” If multiple sections are high, install the upper left section(s) following the same steps 2-4. Install Jamb Splice and Stiffener Splice when required
- For visible mullions, install I-mullion on right hand jamb
- For hidden mullions, install gasket or sealant (by others) between mating stiffener angles
- Install backer rod and caulk around the entire perimeter of the louver, as required. Do not caulk between louver and sill flashing to allow for drainage.
INSTALLATION MATERIAL
- Louvers
- Hinges
- Sawhorses
- Ladder
- Drill
- Driver bit
- Tape measured
- Screw and nails
Maintenance and Warranty
MAINTENANCE AND WARRANTY
MAINTENANCE:-
- Try to clean the accumulated dirt with clear water.
- Don’t use acid-base,bleach-based detergent to clean.
- Avoid cleaning Louvers by using a Scouring agent and abrasive.
- To finish off clean water along with little pressure can be applied on the louvers.
- Remove loose deposits with a wet sponge. Do not dry dust or the surfaces could be scratched. Remove any moss growth and ensure that all drainage systems nearby are unblocked.
- With warm freshwater, use a soft brush and mild household detergent to remove dust, salt or any other deposits. Take particular note of any areas not washed naturally by the rain.
- Rinse thoroughly with fresh water to remove any remaining detergent.
WARRANTY: 1 year for color fade
SUBBASE REQUIREMENTS: DRY, LEVELLED, NO DIRT OR GRITS, NO CRACKS, FIRM
Videos : Available on Request