Wooden Blinds

This type of blind has become extremely popular over the last few years, moving from a timeless classic to a modern and contemporary 'must-have' to complement today's interior design trends. Wooden blinds are generally known as Venetian blinds. A number of horizontal wooden slats are joined together by corded pulleys which can either gather all the slats at the top of the window to reveal the view or simply angle the slats while allowing some light to travel through the blind yet retaining some level of privacy.

PRODUCT FEATURES:-

· Modern contemporary and fashionable in a wide range of colors

· Light filtering to reduce glare and give privacy

· Easy to use with a choice of slats and control options

· Motorized with remote.

· Luxurious, modern simplicity

· Versatile for different window and doors

· Easy to remove for cleaning.

ACCESSORIES:-

▪ Valance and valance clip

▪ Box end bracket

▪ End stiffener

▪ Wand tilter

▪ Crade ,Drum

▪ Tilt rod

▪ Head rail

▪ Cord lock ,

▪ Ladder Clip ,Hook

▪ Safety washers ,Wand

▪ Lift strings ,slats Wood

▪ Tassels ,Bottom rail

▪ String ladder ,Bottom rail buttons

INSTALLATION METHOD:-

1. From the point at the bottom of your window where your blinds will hang, measure up to the top of your window the length of the blinds you have ordered. Make a mark at the top of the measurement and center your head rail on the mark.
2. Use a pencil to make a mark 3 inches in from each end of the head rail.
3. Align the top of your left bracket along the inside of the pencil line and fasten to the wall with the supplied screws. Repeat on the right side, as well as for any additional brackets. Make sure the brackets are aligned and level.
4. Hook the front of your head rail into the brackets and push up on the backside until it snaps into place.
5. To install the vanes or louvers, pull the cord to space the vane stems evenly, then use the chain to rotate until the openings are facing you.
6. Attach the first vane by gently sliding it up into the plastic stem until it snaps into place. Repeat this process until all vanes are attached.
7. Install your safety bracket to keep the cord or chain taut. Place the bracket near the outside bottom of the window frame where it will not interfere with the operation of your vertical blinds.
8. Insert the valance ends into the corners of the valance and attach to the front. Attach the included valance clips onto the head rail and slide the valance onto the clips.
9. Test your new blinds. Use the pull cord to slowly raise and lower your blinds, and tilt your slats by either adjusting the tilt cord or rotating the wand.