Transport Blinds

Transport blind are used in windows of Airconditioned railway coaches, AC bus coach and other vehicles. They offer a fashionable modern look for windows. These blinds are used to protect the vehicle and the passengers from direct sunlight and its UV radiation.

PRODUCT FEATURES:-

· Modern contemporary and fashionable in a wide range of colors

· Easy to operate

· Child friendly - no cords or loose cables

· Size according to Customer requirement.

· These blinds are Antibacterial ,Attractive pattern ,Good quality ,High grip

· Easy to clean and maintain.

INSTALLATION METHOD:-

1. From the point at the bottom of your window where your blinds will hang, measure up to the top of your window the length of the blinds you have ordered. Make a mark at the top of the measurement and center your head rail on the mark.
2. Use a pencil to make a mark 3 inches in from each end of the head rail.
3. Align the top of your left bracket along the inside of the pencil line and fasten to the wall with the supplied screws. Repeat on the right side, as well as for any additional brackets. Make sure the brackets are aligned and level.
4. Hook the front of your head rail into the brackets and push up on the backside until it snaps into place.
5. To install the vanes or louvers, pull the cord to space the vane stems evenly, then use the chain to rotate until the openings are facing you.
6. Attach the first vane by gently sliding it up into the plastic stem until it snaps into place. Repeat this process until all vanes are attached.
7. Install your safety bracket to keep the cord or chain taut. Place the bracket near the outside bottom of the window frame where it will not interfere with the operation of your vertical blinds.
8. Insert the valance ends into the corners of the valance and attach to the front.