Faux Blinds

Faux wood blinds are simply imitation wood blinds; hence the word “faux” which means imitation or artificial. Faux wood blinds look like the “natural thing,” faux wood blinds are made of either composite wood, vinyl or PVC. The composite type often contains a real wood core but are also coated with a protective polymer. Like real wood treatments, they are made cordless or corded and come in different colors to perfectly match every home’s interior and exterior. Both of these materials are highly durable and will not warp, crack or fade, making them good choices for humid spots such as kitchens and bathrooms. High traffic areas that get a lot of wear and tear from our busy, curious children and other active areas demand faux wood blinds. If you live near the coast or in the South, in areas of extreme humidity and heat, you will want faux wood blinds. Faux wood blinds are easy to clean as any type of cleaning products can be used since you don’t have to worry about damaging any of the fine grain of real wood. Some faux woods tend to be heavier and can create a bit larger stack at the top of the window which decreases some light when raised. If you have a large or oversize window, you might struggle when raising or lowering this blind. However, faux wood blinds are the economical, inexpensive choice to give your home the “natural” look you want to achieve. Faux wood blinds continue to be one of the most popular window treatments for their versatility and uncomplicated design.

PRODUCT FEATURES:-

· Modern contemporary and fashionable in a wide range of colors

· Faux wood blinds provide gorgeous earthy look of natural wood but without moisture concerns

· They are strong and durable

· Moisture resistant and budget friendly.

· Light filtering to reduce glare and give privacy

· Easy to use with a choice of slats and control options

· Made to Measure

· Motorized with remote.

· Luxurious, modern simplicity

· Easy to remove for cleaning.

ACCESSORIES:-

▪ Valance and valance clip

▪ Box end bracket

▪ End stiffener

▪ Wand tilter

▪ Crade ,Drum

▪ Tilt rod

▪ Head rail

▪ Cord lock ,

▪ Ladder Clip ,Hook

▪ Safety washers ,Wand

▪ Lift strings ,slats Wood

▪ Tassels ,Bottom rail

▪ String ladder ,Bottom rail buttons

INSTALLATION METHOD:-

1. From the point at the bottom of your window where your blinds will hang, measure up to the top of your window the length of the blinds you have ordered. Make a mark at the top of the measurement and center your head rail on the mark.
2. Use a pencil to make a mark 3 inches in from each end of the head rail.
3. Align the top of your left bracket along the inside of the pencil line and fasten to the wall with the supplied screws. Repeat on the right side, as well as for any additional brackets. Make sure the brackets are aligned and level.
4. Hook the front of your head rail into the brackets and push up on the backside until it snaps into place.
5. To install the vanes or louvers, pull the cord to space the vane stems evenly, then use the chain to rotate until the openings are facing you.
6. Attach the first vane by gently sliding it up into the plastic stem until it snaps into place. Repeat this process until all vanes are attached.
7. Install your safety bracket to keep the cord or chain taut. Place the bracket near the outside bottom of the window frame where it will not interfere with the operation of your vertical blinds.
8. Insert the valance ends into the corners of the valance and attach to the front. Attach the included valance clips onto the head rail and slide the valance onto the clips.
9. Test your new blinds. Use the pull cord to slowly raise and lower your blinds, and tilt your slats by either adjusting the tilt cord or rotating the wand.